Xiamen Mactotec Equipment Co., Ltd offers Single Hammer Rock Driller for Vertical and Horizontal Drilling in stone quarries. This drilling machine mainly used for drilling holes to divide blocks in quarries, one hole each time.
Rock Drill: YT28/29
Maximum Depth of Drilling: 6M
Minimum Air Pressure: 0.5~0.7Mpa
Total Compressed Air Consumption: 7M3/min
Track Travel: 2M
Diameter of Drilling: Φ34~42mm
Drilling Direction: Any Direction
Features and Advantages:
- MTR-28/29B is available for vertical and horizontal drilling rows of holes.
- Machine’s base has lifting support to adjust the drilling height to meet different drilling requirements; equipped with self locking nuts which has high stability.
- Machine can be turned to any direction to adjust the drilling position; fixed by special wedge blocks, easy to operate and with high practicability.
- Machine is advanced by chain wheel and chain bar, can drill holes automatically with high speed; during horizontal hole drilling, machine can cling to the ground, so it has enough twisting force.
- Main machine
- 2pcs of Φ34mm tapered drilling bits; 2pcs of Φ42mm tapered drilling bits
- 2pcs of 1M tapered drilling rods; 2pcs of 1.6M tapered drilling rods; 2pcs of 2M tapered drilling rods